| Referred Paper ： |
研究論文
ASME J. of Mech. Eng. , 1993 \\\”On the Mechanism of Fluid Transport Across the Grinding Zone\\\”
ASME J. Tribology, 1992 \\\”Lubrication with Emulsion in Cold Rolling\\\”
ASME J. Tribology, 1992 \\\”Lubrication with Binary Mixtures: Liquid-Liquid Emulsion in EHL Conjunction\\\”
Tribology Transactions, Vol. 35, No. 1, 1992 \\\”Notes on Transient THD Effects in A Lubrication Film\\\”
Tribology Transactions, Vol. 34, p.259, 1991 \\\”The Influence of Lubricant Visco-Plastic Character on the Line Contact EHL under High Sliding Speeds\\\”
ASME J. Tribology, Vol. 113, p. 398, 1991 \\\”On The Fluid-Solid Interaction in Reference to Thermo-EHL Analysis of Journal Bearings\\\”
ASME J. Tribology, Vol. 113, p. 398, 1991 \\\”On The Maximum Temperature in Double-Layer Journal Bearings\\\”
WEAR, Vol. 137, p. 51, 1989 \\\”On The Role of Particulate Contamination on Scuffing Failure\\\”ASME J. Tribology , Vol. 112, p. 259, 1989 \\\”A Theory of Thermal EHL of Liquid-Solid Lubricant\\\”
ASME J. Tribology, Vol. 111, p. 440, 1989 \\\”A Theory of Thermal EHL of Liquid-Solid Lubricant\\\”
WEAR, Vol. 127, p.1, 1988 \\\”The Influence of the Character of Lubricant on the Surface Strength of Gears\\\”
ASME J. Tribology, Vol. 110, p. 1, 1988 \\\”A Full Numerical EHD Solution for Line Contact under Pure Rolling Condition with a Non-Newtonian Rheological Model\\\”
Proc. of CSME Symp. on Gear Strength & Testing, 1987 \\\”Gear Surface Wear and the Optimum Design\\\”,
Proc. of CSME Symp. on Gear Strength & Testing, 1987 \\\”A Thermal Network Theory and Its Application for Predicting Temperature Distribution in A Gear Transmission System\\\”
Proc. of CSME Symp. on Gear Strength & Testing, 1987 \\\”Friction Coefficient of Gears\\\”
ASME J. Tribology, Vol. 109, p. 666, 1987 \\\”Combined Effects of Thermal and non-Newtonian Character of Lubricant on Pressure, Film Profile, Temperature Rise and Shear Stress in EHL\\\”
WEAR, Vol. 118, p.185, 1987 \\\”Influence of Visco-Plastic and Visco-Elastic Character of Lubricant on EHL\\\”
GEAR, 1986 \\\”The Temperature Rise in Gear Meshing Zone Analyzed by A Thermo-EHL Theory\\\”Porc. of 13th Leeds-Lyon Symp. on Tribology, 1986 \\\”The Effect of Surface Roughness orientation on EHL\\\”
Proc. of 13th Leeds-Lyon Symp. on Tribology, 1986 \\\”A Full Numerical EHL Solution for Sliding-Rolling Line Contacts with a Non-Newtonian Rheological Model\\\”
“ Digital Denture Manufacturing-Application of abrasive computer tomography, CNC machining, and rapid prototyping technologies”- 2 nd International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, 28 September – 01 October, 2005 |
|
