I-Tseng Tang Professor

Name:

I-Tseng Tang

Position: Professor
Degree: Ph.D, The Institute of Microelectronics Engineering, National Cheng kung University
Experiences: Department of Environment and Energy, National University of Tainan Assistant Professor 2006 ~ 2009
Department of Greenergy Technology, National University of Tainan Associate Professor 2009 ~ 2012
Department of Greenergy Technology, National University of Tainan Professor 2012 ~
Expertise: Optoelectronics and Microelectronics Engineering
Referred Paper : 【1】Wu-Nan Chen, Min-Hung Weng, I-Tseng Tang, Cheng-Yuan Hung, Tsung-Chieh Cheng and Mau-Phon Houng, “Notch Filters with Novel Microstrip, Triangle-Type Resonators,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 51, No. 8, pp. 1018-1021(2004)

【2】Na-Fu Wang, I-Tseng Tang, Han-Jan Chen, Mau-Phon Houng, Yeong-Her Wang, “Investigation of A Novel Microwave Surface Acoustic Wave Filter under Different Piezoelectric Substrates,” Japanese Journal of Applied Physics, Vol. 43, No. 12, pp. 8139-8145,(2004)

【3】I-Tseng Tang, Han-Jan Chen, W. C. Hwang, Y. C. Wang, Mau-Phon Houng and Yeong-Her Wang, “Applications of piezoelectric ZnO film deposited on diamond like carbon coated onto Si substrate under fabricated diamond SAW filter,” Journal of Crystal Growth, Vol. 262, pp. 461-466(2004)

【4】Chen-Cheng Sun, Shih-Chin Lee, Wen-Chi Hwang, Jenn-Shyong Hwang, I-Tseng Tang and Yaw-Shyan Fu, “Surface Free Energy of Alloy Nitride Coatings Deposited Using Closed Field Unbalanced Magnetron Sputter Ion Plating,” Materials Transactions, Vol. 47, No. 10, pp. 2533 to 2539, The Japan Institute of Metals(2006)

【5】Chi-Min Li, Jia-Chyi Wu and I-Tseng Tang, “An Analytic Analysis of W-CDMA Smart Antennas Beam forming Using Complex Conjugate and DOA Methods,” Journal of marine science and technology Vol. 15, No. 4, pp. 287-294(2007)

【6】Chi-Min Li, Jia-Chyi Wu, Jia-Ching Huang, Shao-Min Wen and I-Tseng Tang, “Performance Analysis of HSDPA Downlink Equalizers, Performance Comparison of HSDPA Downlink Equalizers,” AE ¨U Int. J. Electron. Commun(2007)

【7】Ding-Bing Lin, I-Tseng Tang and Ming-Yu Tsou, “A compact UWB antenna with CPW-fed,” Microwave Opt. Technol. Lett., Vol. 49, No. 3, March, pp. 564-567(2007)

【8】I-Tseng Tang, Ding-Bing Lin and Tzu-Hao Lu, “Apply the Slow Wave Effect to Design the Compact Antenna,” Microwave Journal, Vol. 51, No. 6, June, pp. 96-105,(2008)

【9】I-Tseng Tang, Ding-Bing Lin, Wen-Li Chen and Jui-Hong Horng, “Miniaturized Hexaband Meandered PIFA Antenna Using Three Meandered-shaped Slits,” Microwave and Optical Technology Letters Vol. 50, No. 4, April, pp. 1022-1025,(2008)

【10】I-Tseng Tang, Ding-Bing Lin, Geng-Hong Liou and Jui-Hong Horng, “Miniaturized 5.2 GHz Notched UWB CPW-fed Antenna Using Dual Reverse Split Trapezoid Slots,” Microwave and Optical Technology Letters, Vol. 50, No. 3, March, pp. 652-655(2008)

【11】I-Tseng Tang, Ding-Bing Lin, Chi-Min Li and Min-Yuan Chiu, “Ultra-Wideband Bandpass Filter Using Hybrid Microstrip-Defected-Ground Structure,” Microwave and Optical Technology Letters, Vol. 50, No. 12, pp. 3085-3089, December 2008.(2008)

【12】Chi-Min Li, Jia-Chyi Wu, Jia-Ching Huang, Shao-Min Wen and I-Tseng Tang, “Performance Analysis of HSDPA Downlink Equalizers, Performance Comparison of HSDPA Downlink Equalizers,” Aeu-international Journal of electronics and communications, Vol. 1, pp. 818-821, 2009.(2009)

【13】Chi-Min Li, Shao-Min Wen, Pao-Jen Wang, Jia-Chyi Wu, and I-Tseng Tang, “An Overlap-Cut Frequency Domain Equalizer with Decision Feedback,” IEICE Transaction on Communications, Vol. E92-B, No.05, pp.1475-1483, May 2009.(2009)

【14】Liang-Wen Ji, Shi-Ming Peng, Jun-Sheng Wu, Wei-Shun Shih, Cheng-ZhiWu, and I-Tseng Tang, “Effect of seed layer on the growth of well-aligned ZnO nanowires,” Journal of Physics and Chemistry of Solids, pp. 1-4, July 2009.(2009)

【15】Na-Fu Wang, Yu-Zen Tsai, and I-Tseng Tang*, “S-Band Low-loss Wide-Bandwidth Microwave Surface Acoustic Wave Filter,” Microwave Journal, Vol. 51, No. 9, pp. 144-152, September 2009.(2009)

【16】I-Tseng Tang, Ding-Bing Lin, Chi-Min Li, and Min-Yuan Chiu, “Compact Pentagon Ultra-Wideband Bandpass Filter with Good Out-of-Band Performance,” J. of Electromagn. Waves and Appl., Vol. 23, pp. 1695–1706, 2009.(2009)

【17】Ding-Bing Lin, I-Tseng Tang*, and Yu-Yao Chang, “Flower-like CPW-Fed Monopole Antenna for Quad-band operation of mobile handsets,” J. of Electromagn. Waves and Appl., Vol. 23, pp. 2271–2278, 2009.(2009)

【18】I-Tseng Tang, Ding-Bing Lin, and Yu-Yao Chang, “Flower-like CPW-Fed Monopole Antenna for Quad-band Operation of Mobile Handsets,” J. of Electromagn. Waves and Appl., Vol. 23, pp. 2271–2278, 2009.(2009)

【19】I-Tseng Tang, Ding-Bing Lin, and Ming-Zhang Hong, “A Compact Quad-Band PIFA by Tuning the Defected Ground Structure for Mobile Phones,” Progress In Electromagnetics Research B, Vol. 24, pp. 173–189, 2010.(2010)

【20】Ding-Bing Lin, I-Tseng Tang*, and Yu-Jiau Wei, “Compact dual-band-notched CPW-fed wide-slot antenna for WLAN and WiMAX applications,” Microwave and Optical Technology Letters, Vol. 53, No. 7, pp. 1496-1501, July 2011.(2011)

【21】I-Tseng Tang*, Chi-Min Li, and Chia-Hsun Hung, “Octa-band LV-shape CPW-fed Monopole Antenna,” J. of Electromagn. Waves and Appl., Vol. 25, pp. 1471–1480, 2011.(2011)

【22】D.-B. Lin, P.-C. Tsai, I.-T. Tang*, W.-S. Chiu,”Planar Inverted-L Antenna for Octa-Band Operations of Smart Handsets”, Journal of Electromagnetic Waves And Applications,Volume 25, Issue 16,Number 2011,Pages 2188–2200.(SCI)(通訊作者)(2011)

【23】Ding-Bing Lin, I-Tseng Tang*, En-Tsao Chang,”Printed spiral-slot multimode antenna miniaturization for digital television signal receptions”, Microwave and Optical Technology Letters,Volume 54,Issue 6,June 2012, Pages 1369–1371.(SCI)(通訊作者)(2012)

【24】Liang-Wen Ji, Yu-Jen Hsiao, I-Tseng Tang*, Teen-Hang Meen, Chien-Hung Liu, Jenn-Kai Tsai,Tien-Chuan Wu and Yue-Sian Wu1, “Annealing effect and photovoltaic properties of nano-ZnS/textured p-Si heterojunction”, Nanoscale Research Letters,p1-6,2013.doi:10.1186/1556-276X-8-470(SCI)(通訊作者)(2013)

【25】Kuo-Chin Hsu, Yaw-Shyan Fu, Pei-Ying Lin, I-Tseng Tang, Jiunn-Der Liao* (2013, Nov). Fabrication and characterization of CuInSe2 thin film applicable for a solar energy light absorption material via a low temperature solid state reaction. International Journal of Photoenergy, 2013, 156964. (SCI, 10/80, Optics). NSC 102-2113-M-024-001.(2013)

【26】Teen-Hang Meen, Jenn-Kai Tsai, Shi-Mian Chao, Yu-Chien Lin, Tien-Chuan Wu, Tang-Yun Chang, Liang-Wen Ji, Walter Water, Wen-Ray Chen, I-Tseng Tang and Chien-Jung Huang*, “Surface plasma resonant effect of gold nanoparticles on the photoelectrodes of dye-sensitized solar cells,” Nanoscale Research Letters, 2013. (NSC 101-2221-E-024-015)(2013)

【27】Annealing Effect and Photovoltaic Properties of ZnS/Textured p-Si Heterojunction(2013)

【28】A novel co-planar waveguide fed transparent antenna for Wi-Fi applications(2014)

【29】Fabrication and Characterization of a-IGZO Thin-Film-Transistors with Passivation layers(2015)

【30】Coplanar Waveguide (CPW)-fed Antenna Slot for UHF Band of RFID-Tag(2016)

【31】Synthesis and Characterization of Ternary Sulfide ZnIn2S4 Light Absorbance Materials(2017)

【32】Nanowires of CH3NH3PbI3 based on Cu2ZnSnS4 nanoparticles phase-induced crystallization(2018)

Peng-Jen Chen Assistant professor

Name: Peng-Jen Chen
Position: Assistant professor
Degree: PhD of Mechanical Eng., National Cheng Kung Univ.
Experiences: Engineer of Industrial Technology Research Institute(ITRI)
Expertise: Numerical Simulation, heat flow analysis, Optimization, MEMS
Patents : 【1】一種具微米凹槽結構紅外光吸收特性材料之紅外光感測元件,陳鵬仁、許豐家、張勳承、蘇中源。
【2】 可減低熱應力的微加熱器結構,陳鵬仁、李柏勳、黃肇達。
【3】 用於射出成型製程的感測器,陳鵬仁、蔡孟樵、蘇中源。
Research project : 【1】陳鵬仁,台朔脫硫塔效能最佳化設計,產學合作計畫主持人,台塑重工”脫硫塔效能105年9月~106年2月
Referred Paper : 1. “Numerical simulation of fluid flow and heat transfer characteristics in channel with V corrugated plates.” Yang, Yue-Tzu, and Peng-Jen Chen. Heat and mass transfer 46.4 (2010): 437-445. (SCI)
2. “Numerical optimization of turbulent flow and heat transfer characteristics in a ribbed channel.” Yang, Yue-Tzu, and Peng-Jen Chen. Heat Transfer Engineering 36.3 (2015): 290-302. (SCI)
3. “Numerical Study of a Solar Collector with Partitions.” Yang, Yue-Tzu, and Peng-Jen Chen. Numerical Heat Transfer, Part A: Applications 66.7 (2014): 773-791.(SCI)
4. “Numerical simulation of impingement cooling for a pin-fin heat sink.” Peng-Jen Chen, Yue-Tzu Yang *, and Shi-Jia Lin. THE ASIAN SYMPOSIUM ON COMPUTATIONAL HEAT TRANSFER AND FLUID FLOW – 2011, KYOTO, JAPAN (2011). (Conference)
5. “方柱鰭片散熱器之電子冷卻數值研究”陳鵬仁、鄞建章、楊玉姿,中國機械工程學會第二十九屆全國學術研討會 (2012)。 (Conference)
6. “實驗室空調系統之熱對流分析”張勳承、陳鵬仁、蘇柏仁,中國機械工程學會第三十一屆全國學術研討會(2014)。 (Conference)
7. “應用晶格波茲曼法於具表面粗糙度之微流道電滲流模擬”張勳承、陳鵬仁、許豐家、蘇中源、蔡孟樵,微系統暨奈米科技協會會刊(2017)。
8. ” Optimization of wavy channels using genetic algorithm “陳鵬仁、蔡孟樵、許豐家、蘇中源,微系統暨奈米科技協會會刊(2017)。
9. “熱電堆溫度感測元件幾何結構設計之探討”陳鵬仁,蘇中源,許豐家,國際智慧感測器研討會(2018)。(Conference)

Jenn-Kun Kuo Associate Professor

Name: Jenn-Kun Kuo
Position: Associate Professor
Degree: Ph.D,National Cheng kung University
Experiences: 台塑石化公司 麥寮(海豐)火力發電廠 工程主辦 1998~2001
元砷光電公司 LED製程部 工程師 2001~2002
國立中山大學 機械與機電工程學系 助教 2002~2004
遠東科技大學 機械工程系 講師 2004/8/1~2007/7/31
國立臺南大學 綠色能源科技研究所 助理教授 2007/8/1~2010/01
國立臺南大學 綠色能源科技學系 助理教授 2010/02~2011/07
國立臺南大學 綠色能源科技學系 副教授 2011/08~2014/7
國立臺南大學 綠色能源科技學系 教授 2011/8~2014/7
University of Birmingham Mechanical Engineering 訪問教授 2013/7~2013/9
國立臺南大學 綠色能源科技學系 教授 2014/8~迄今
Expertise: Fuel Cells
Referred Paper : (1) S.S. Hsieh, J.K. Kuo, C.F. Hwang, H.H. Tsai, “A novel design and microfabrication for a micro PEMFC” Microsystem Technologies 10 (2004) 121-126. (SCI) (IF: 1.025)(2) S.S. Hsieh, C.F. Hwang, J.K. Kuo,H.H. Tsai, “SU-8 flow field plates for a micro PEMFC” Journal of Solid State Electrochem 9 (2005) 121-131. (SCI) (IF: 1.821)

(3) S.S. Hsieh, J.K. Kuo, S.H. Yang, C.F. Hwang, H.H. Tsai, “Study of operational parameters on the performance of micro PEMFCs with different flow fields” Energy Conversion & Management 47 (2006) 1868-1878. (SCI) (IF: 2.054)

(4) C.K. Chen, J.K. Kuo, “Nylon 6/CB polymeric conductive plastic bipolar plates for PEM fuel cells” Journal of Applied Polymer Science 101 (2006) 3415-3421. (SCI) (IF: 1.2)

(5) J.K. Kuo, C.K. Chen, “A novel Nylon-6-S316L fiber compound material for injection molded PEM fuel cell bipolar plates” Journal of Power Sources 162 (2006) 207-214. (SCI) (IF: 3.792)

(6) J.K. Kuo, C.K. Chen, “Evaluating the enhanced performance of a novel wave-like form gas flow channel in the PEMFC using the field synergy principle” Journal of Power Sources 162 (2006) 1122-1129. (SCI) (IF: 3.792)

(7) J.K. Kuo*, C.K. Chen, “The effects of buoyancy on the performance of a PEM fuel cell with a wave-like gas flow channel design by numerical investigation” International Journal of Heat and Mass Transfer 50 (2007) 4166-4179.(SCI) (IF: 1.947)

(8) J.K. Kuo*, C.K. Chen, “Improvement of the performance of the gas flow channel in the PEM fuel cells,” Energy Conversion and Management.49(2008)2776-2787 (SCI)(IF:1.944)

(9) Jenn-Kun Kuo*, Cai-Wan Chang-Jian, Cha’o-Kuang Chen, “Numerical investigation the Performance and Transport Phenomena of a Proton Exchange Membrane Fuel Cell with a Wavelike Gas Flow Channel Design”, Journal of Applied Polymer Science. Vol. 111, 1440-1448 (2009). (SCI) (IF:1.2)

(10) Shiuh-Ming Chang*, Jenn-Kun Kuo, ” Injection molded PEM fuel cell bipolar plates structure”, Journal of Professional Mechanical Engineers, 2008, Vol.1, No.4, pp.14-20.

(11) J.K. Kuo*, T.H. Yen, C.K. Chen,” Three-dimensional numerical analysis of PEM fuel cells with conventional straight and wave-like gas flow fields channels” Journal of Power Sources 117 (2008) 96-103. (SCI)(IF: 3.792)

(12) C. T. Lin, J. K. Kuo, T. H. Yen*, “Quantum Fluid Dynamics and Quantum Computational Fluid Dynamics”, Journal of Computational and Theoretical Nanoscience,Vol.6, No.5, 1090-1108 (2009) (SCI)(IF:0.9)

(13) Cai-Wan Chang-Jian*, J.K. Kuo, “Bifurcation and chaos for porous squeeze film damper mounted rotor–bearing system lubricated with micropolar fluid,” Nonlinear Dynamics. 58, (2009) 697-741. (SCI) (IF:1.658)(30/105)

(14) T.H. Yen, J.K. Kuo, Y.T. Yang*,”Comparison of Heat Transfer Coefficient in the Backward-Facing Step Flow with the LBM and Field Synergy Principle”, Journal of the Chinese Society of Mechanical Engineers, Vol.30, No.2, 125~134 (2009) (SCI)(IF:0.656)

(15) Shiuh-Ming Chang, Jenn-Kun Kuo*,”Simulation of PEM fuel cell gas flow field channel “, Journal of the Chinese Society of Mechanical Engineers, 2010, VO1.31 ,NO.6(SCI)(IF:06.56)

(16) J.K. Kuo*“ Numerical investigation into thermofluidic and electrochemical characteristics of tubular-type SOFC“, Fuel Cells Vol.10 (2010) 463-471 (SCI)(IF:3.32)

(17) Jenn-Kun Kuo*,Pei-Hsing Huang, Shiuh-Ming Chang ,”Displacement Impact on PEM Fuel Cell Bipolar Plate for Fibre Orientation and Cooling System”, Journal of the Chinese Society of Mechanical Engineers,Vol.32 (2011) 409-417. (SCI) (IF: 0.696) (通訊作者)

(18) J.K.Kuo*, Jian-Kai Wang”Characteristic simulation and mass transfer of membrane electrode assembly in SOFC”Journal of Soild State Electrochemistry Vol.16 (2012) 329-340. (SCI)(IF:2.234) (通訊作者)

(19) J.K. Kuo*, C.F. Wang, “An integrated simulation model for PEM fuel cell power systems with a buck DC-DC converter” International Journal of Hydrogen Energy, Vol.36 (2011) 11846-11855 (SCI) (IF: 4.053)(通訊作者)

(20) Pei-Hsing Huang*, Jenn-Kun Kuo, “Thermal stretching of defective nanowires: the coupled effects of vacancy cluster defects, operating temperature, and wire cross-sectional area”, Applied Physics A: Material Science & Processing, Vol.103,2010,1083-1092. (SCI) (IF: 1.595)

(21) Chin-Tien Lin, Jenn-Kun Kuo, Tzu-Hsiang Yen “Three-dimensional molecular dynamics study of aperture shape effect on nanojet ejection”, Journal of the Chinese Institute of Engineers, Journal of the Chinese Institute of Engineers, Vol.34, Issue 8, 1001-1011 (2011) (SCI (IF:0.225)

(22) Jenn-Kun Kuo, Hung-Yi Li Wen-Chung Weng, Wei-Mon Yan, “Numerical investigation into transient response of proton exchange membrane fuel cell with serpentine flow field”, Iernational Journal of Energy Research VOL.37 (2013)1302-1312.(SCI) (IF:2.122) (第一作者)

(23) Jenn-Jiang Hwang , Yu-Jie Chen, Jenn-Kun Kuo*,”The Study on the Power Management System in a Fuel Cell Hybrid Vehicle”, International Journal of Hydrogen Energy 37(2012) 4476-7789.(SCI)(IF:4.402)(通訊作者)

(24) J.J. Hwang , P.C. Wang, J.K. Kuo*,”Simulation of a Cogeneration System Based on Proton Exchange Membrane Fuel Cell”, Fuel Cells, Volume 12 (2012) 326-334.(SCI)(IF:3.32) (通訊作者)

(25) P.H. Huang*, J.K. Kuo, “Atomistic Simulations of Solid-state Pressure Welding of Metallic Nanowires”, Applied Physics A, Accepted on 4 July 2012. (SCI)(IF:1.63)

(26) Jenn-Kun Kuo*, Jenn-Jiang Hwang, Chin-Hong Lin,”Performance Analysis of a Stationary Fuel Cell Thermoelectric Cogeneration System”, Fuel Cells, Vol.12 (2012) 1104-1114. (SCI)(IF:2.364)(通訊作者)

(27)Jenn-Kun Kuo*, Pei-Hsing Huang, Chi-Fa Wang,”Numerical Modeling and Analysis of PEMFC Integrated with Auxiliary Power Source”, International Journal of Energy Research, Vol.37 (2013) 1635-1644 (SCI)(IF:1.987)(通訊作者)

(28)J.J. Hwang,W.R. Chang,J.K Kuo,W.Wu,”Experimental study on performance of a planar membrane humidifier for a proton exchange membrane fuel cell stack”, Journal of Power Sources, Vol.215,2012,69-76. (SCI)(IF:4.951)

(29)Jenn-Kun Kuo*, Yuan-Yao Hsu,”Intelligent Control Scheme for the Prototype Stationary 1.0 kW PEM Fuel Cell System”, International Journal of Green Energy,Vol.10(2013) 1086-1101. (SCI)(IF:2.069)(通訊作者)

(30)Jenn-Jiang Hwang*, Jenn-Kun Kuo, Wei Wu, Wei-Ru Chang, Chih-Hong Lin, Song-En Wang,”Lifecycle performance assessment of fuel cell/battery electric vehicles”, International Journal of Hydrogen Energy 38(2013)3433-3446. (SCI)(IF:4.402)

(31)Jenn-Kun Kuo*, Hsiang-Kuei Hsieh, “Research of flywheel system energy harvesting tehnology for fuel cell hybrid vehicles” Fuel Cells, Vol.13( 2013)1234-1241. (SCI)(IP:2.364)(通訊作者)

(32)Jenn-Kun Kuo, Pei-Hsing Huang*, Wei-Te Wu, “Mechanical and fracture behaviors of defective silicon nanowires: combined effects of vacancy clusters, temperature, wire size, and shape” Applied Physics A, Accepted on 24 July 2013.(SCI)(IF:1.545)

(33)Pei-Hsing Huang, Jenn-Kun Kuo*, Yuan-Yao Hsu, “Design and Implementation of 8051 Single-Chip Microcontroller for Stationary 1.0 kW PEM Fuel Cell System”, Journal of Chemistry, Vol.762954 (2014)1-8.(SCI)(IF:0.622) (通訊作者)

(34)Jenn-Jiang Hwang, Chin-Hong Lin, Jenn-Kun Kuo*, “Performance analysis of fuel cell thermoelectric cogeneration system with methanol steam reformer”, International Journal of Hydrogen Energy, Vol.39 (2014)14448-14459. (SCI)(IF:2.93)(通訊作者)

(35)Jenn-Kun Kuo, Pei-Hsing Huang*, Wei-Te Wu, Chi-Ming Lu,”Mechanical and fracture behaviors of defective silicon nanowires: combined effects of vacancy clusters, temperature, wire size, and shape”, Applied Physics A, Vol.114 (2014)1247-1256.(SCI)(IF:1.694) (第一作者)

(35)Pei-Hsing Huang, Jenn-Kun Kuo*, Chun-Yen Huang, “A new application of the UltraBattery to hybrid fuel cell vehicles”, International Journal of Energy Research, Vol.40 (2016) 146-159. (SCI)(IF:2.4)(通訊作者)

(36) Jenn-Kun Kuo*, Chung-Neng Huang, Tsung-Hung Lu, “Experimental investigation on heat transfer and pressure drop of ZnO/ethylene glycol-water nanofluids in transition”, Applied Thermal Engineering, Vol. 93 (2016) 425-432. (SCI)(IF: 2.739)(第一作者)(通訊作者)

(37) Pei-Hsing Huang , Jenn-Kun Kuo*, Zong-Dain Wu, “Applying small wind turbines and a photovoltaic system to facilitate electrolysis hydrogen production”,International Journal of Hydrogen Energy, Vol. 41, 2016, 8514-8524. (IF: 3.205) (通訊作者)

(38) Jenn-Kun Kuo, Pei-Hsing Huang*, Tzu-Hsiu Huang and Jheng-Yu Luo, “Adsorption behaviors of hydrogen sulphide on Au(110) nanoslit array surfaces using molecular dynamics simulations”, Molecular Simulation, Vol.42 (2016) 1429-1436. (IF:1.678) (第一作者)

(39) Jenn-Kun Kuo, Pei-Hsing Huang*, Meng-Jun Guo, “Removal of CrMo alloy steel components from investment casting gating system using vibration-excited fatigue failure”, The International Journal of Advanced Manufacturing Technology, Vol. 89, 2017, 101-111. (SCI)(IF:2.209) (第一作者))

(40) Pei-Hsing Huang, Jenn-Kun Kuo*, Cheng-Yun Han, “Numerical investigation into slope-climbing capability of fuel cell hybrid scooter”, Applied Thermal Engineering, Vol.110, 2017, 921-920. (SCI)(IF: 3.356) (通訊作者)

(41) Jenn-Kun Kuo, Pei-Hsing Huang*, Hsin-Yi Lai, Jian-Rong Chen, ” Optimal gating system design for investment casting of 17-4PH stainless steel enclosed impeller by numerical simulation and experimental verification”The International Journal of Advanced Manufacturing Technology, Vol.92 (2017) 1093-1103. (SCI) (IF:2.209 ) ( 第一作者)

(42). Pei-Hsing Huang, Jenn-Kun Kuo*, Sie-Jhih Tsai , Yu-Chou, Tsai, “Evaporation analysis of different fuels in evaporator coil of steam reformer for stationary PEM fuel cell systems”, Applied Thermal Energy, Accepted on 2017.9.10. (SCI)(IF:3.356) (通訊作者)

Speeches

Academic Year 2018


Academic Year 2017


Academic Year 2016


Academic Year 2015


Academic Year 2014


Academic Year 2013


Academic Year 2012


Academic Year 2011


Academic Year 2010


Academic Year 2009

Orientation

Academic Year 2018


Academic Year 2017


Academic Year 2016


Academic Year 2015


Academic Year 2014


Academic Year 2013


Academic Year 2012


Academic Year 2011


Academic Year 2010


Academic Year 2009

Hsin-Hui Chung Assistant Professor

Name: Hsin-Hui Chung
Position: Assistant Professor
Degree: 國立成功大學機械工程學系博士班
Experiences: 可成科技高級工程師
Expertise: 結構分析
破壞力學
有限元素