(2) S.S. Hsieh, C.F. Hwang, J.K. Kuo,H.H. Tsai, “SU-8 flow field plates for a micro PEMFC” Journal of Solid State Electrochem 9 (2005) 121-131. (SCI) (IF: 1.821)

(3) S.S. Hsieh, J.K. Kuo, S.H. Yang, C.F. Hwang, H.H. Tsai, “Study of operational parameters on the performance of micro PEMFCs with different flow fields” Energy Conversion & Management 47 (2006) 1868-1878. (SCI) (IF: 2.054)

(4) C.K. Chen, J.K. Kuo, “Nylon 6/CB polymeric conductive plastic bipolar plates for PEM fuel cells” Journal of Applied Polymer Science 101 (2006) 3415-3421. (SCI) (IF: 1.2)

(5) J.K. Kuo, C.K. Chen, “A novel Nylon-6-S316L fiber compound material for injection molded PEM fuel cell bipolar plates” Journal of Power Sources 162 (2006) 207-214. (SCI) (IF: 3.792)

(6) J.K. Kuo, C.K. Chen, “Evaluating the enhanced performance of a novel wave-like form gas flow channel in the PEMFC using the field synergy principle” Journal of Power Sources 162 (2006) 1122-1129. (SCI) (IF: 3.792)

(7) J.K. Kuo*, C.K. Chen, “The effects of buoyancy on the performance of a PEM fuel cell with a wave-like gas flow channel design by numerical investigation” International Journal of Heat and Mass Transfer 50 (2007) 4166-4179.(SCI) (IF: 1.947)

(8) J.K. Kuo*, C.K. Chen, “Improvement of the performance of the gas flow channel in the PEM fuel cells,” Energy Conversion and Management.49(2008)2776-2787 (SCI)(IF:1.944)

(9) Jenn-Kun Kuo*, Cai-Wan Chang-Jian, Cha’o-Kuang Chen, “Numerical investigation the Performance and Transport Phenomena of a Proton Exchange Membrane Fuel Cell with a Wavelike Gas Flow Channel Design”, Journal of Applied Polymer Science. Vol. 111, 1440-1448 (2009). (SCI) (IF:1.2)

(10) Shiuh-Ming Chang*, Jenn-Kun Kuo, ” Injection molded PEM fuel cell bipolar plates structure”, Journal of Professional Mechanical Engineers, 2008, Vol.1, No.4, pp.14-20.

(11) J.K. Kuo*, T.H. Yen, C.K. Chen,” Three-dimensional numerical analysis of PEM fuel cells with conventional straight and wave-like gas flow fields channels” Journal of Power Sources 117 (2008) 96-103. (SCI)(IF: 3.792)

(12) C. T. Lin, J. K. Kuo, T. H. Yen*, “Quantum Fluid Dynamics and Quantum Computational Fluid Dynamics”, Journal of Computational and Theoretical Nanoscience,Vol.6, No.5, 1090-1108 (2009) (SCI)(IF:0.9)

(13) Cai-Wan Chang-Jian*, J.K. Kuo, “Bifurcation and chaos for porous squeeze film damper mounted rotor–bearing system lubricated with micropolar fluid,” Nonlinear Dynamics. 58, (2009) 697-741. (SCI) (IF:1.658)(30/105)

(14) T.H. Yen, J.K. Kuo, Y.T. Yang*,”Comparison of Heat Transfer Coefficient in the Backward-Facing Step Flow with the LBM and Field Synergy Principle”, Journal of the Chinese Society of Mechanical Engineers, Vol.30, No.2, 125~134 (2009) (SCI)(IF:0.656)

(15) Shiuh-Ming Chang, Jenn-Kun Kuo*,”Simulation of PEM fuel cell gas flow field channel “, Journal of the Chinese Society of Mechanical Engineers, 2010, VO1.31 ,NO.6(SCI)(IF:06.56)

(16) J.K. Kuo*“ Numerical investigation into thermofluidic and electrochemical characteristics of tubular-type SOFC“, Fuel Cells Vol.10 (2010) 463-471 (SCI)(IF:3.32)

(17) Jenn-Kun Kuo*,Pei-Hsing Huang, Shiuh-Ming Chang ,”Displacement Impact on PEM Fuel Cell Bipolar Plate for Fibre Orientation and Cooling System”, Journal of the Chinese Society of Mechanical Engineers,Vol.32 (2011) 409-417. (SCI) (IF: 0.696) (通訊作者)

(18) J.K.Kuo*, Jian-Kai Wang”Characteristic simulation and mass transfer of membrane electrode assembly in SOFC”Journal of Soild State Electrochemistry Vol.16 (2012) 329-340. (SCI)(IF:2.234) (通訊作者)

(19) J.K. Kuo*, C.F. Wang, “An integrated simulation model for PEM fuel cell power systems with a buck DC-DC converter” International Journal of Hydrogen Energy, Vol.36 (2011) 11846-11855 (SCI) (IF: 4.053)(通訊作者)

(20) Pei-Hsing Huang*, Jenn-Kun Kuo, “Thermal stretching of defective nanowires: the coupled effects of vacancy cluster defects, operating temperature, and wire cross-sectional area”, Applied Physics A: Material Science & Processing, Vol.103,2010,1083-1092. (SCI) (IF: 1.595)

(21) Chin-Tien Lin, Jenn-Kun Kuo, Tzu-Hsiang Yen “Three-dimensional molecular dynamics study of aperture shape effect on nanojet ejection”, Journal of the Chinese Institute of Engineers, Journal of the Chinese Institute of Engineers, Vol.34, Issue 8, 1001-1011 (2011) (SCI (IF:0.225)

(22) Jenn-Kun Kuo, Hung-Yi Li Wen-Chung Weng, Wei-Mon Yan, “Numerical investigation into transient response of proton exchange membrane fuel cell with serpentine flow field”, Iernational Journal of Energy Research VOL.37 (2013)1302-1312.(SCI) (IF:2.122) (第一作者)

(23) Jenn-Jiang Hwang , Yu-Jie Chen, Jenn-Kun Kuo*,”The Study on the Power Management System in a Fuel Cell Hybrid Vehicle”, International Journal of Hydrogen Energy 37(2012) 4476-7789.(SCI)(IF:4.402)(通訊作者)

(24) J.J. Hwang , P.C. Wang, J.K. Kuo*,”Simulation of a Cogeneration System Based on Proton Exchange Membrane Fuel Cell”, Fuel Cells, Volume 12 (2012) 326-334.(SCI)(IF:3.32) (通訊作者)

(25) P.H. Huang*, J.K. Kuo, “Atomistic Simulations of Solid-state Pressure Welding of Metallic Nanowires”, Applied Physics A, Accepted on 4 July 2012. (SCI)(IF:1.63)

(26) Jenn-Kun Kuo*, Jenn-Jiang Hwang, Chin-Hong Lin,”Performance Analysis of a Stationary Fuel Cell Thermoelectric Cogeneration System”, Fuel Cells, Vol.12 (2012) 1104-1114. (SCI)(IF:2.364)(通訊作者)

(27)Jenn-Kun Kuo*, Pei-Hsing Huang, Chi-Fa Wang,”Numerical Modeling and Analysis of PEMFC Integrated with Auxiliary Power Source”, International Journal of Energy Research, Vol.37 (2013) 1635-1644 (SCI)(IF:1.987)(通訊作者)

(28)J.J. Hwang,W.R. Chang,J.K Kuo,W.Wu,”Experimental study on performance of a planar membrane humidifier for a proton exchange membrane fuel cell stack”, Journal of Power Sources, Vol.215,2012,69-76. (SCI)(IF:4.951)

(29)Jenn-Kun Kuo*, Yuan-Yao Hsu,”Intelligent Control Scheme for the Prototype Stationary 1.0 kW PEM Fuel Cell System”, International Journal of Green Energy,Vol.10(2013) 1086-1101. (SCI)(IF:2.069)(通訊作者)

(30)Jenn-Jiang Hwang*, Jenn-Kun Kuo, Wei Wu, Wei-Ru Chang, Chih-Hong Lin, Song-En Wang,”Lifecycle performance assessment of fuel cell/battery electric vehicles”, International Journal of Hydrogen Energy 38(2013)3433-3446. (SCI)(IF:4.402)

(31)Jenn-Kun Kuo*, Hsiang-Kuei Hsieh, “Research of flywheel system energy harvesting tehnology for fuel cell hybrid vehicles” Fuel Cells, Vol.13( 2013)1234-1241. (SCI)(IP:2.364)(通訊作者)

(32)Jenn-Kun Kuo, Pei-Hsing Huang*, Wei-Te Wu, “Mechanical and fracture behaviors of defective silicon nanowires: combined effects of vacancy clusters, temperature, wire size, and shape” Applied Physics A, Accepted on 24 July 2013.(SCI)(IF:1.545)

(33)Pei-Hsing Huang, Jenn-Kun Kuo*, Yuan-Yao Hsu, “Design and Implementation of 8051 Single-Chip Microcontroller for Stationary 1.0 kW PEM Fuel Cell System”, Journal of Chemistry, Vol.762954 (2014)1-8.(SCI)(IF:0.622) (通訊作者)

(34)Jenn-Jiang Hwang, Chin-Hong Lin, Jenn-Kun Kuo*, “Performance analysis of fuel cell thermoelectric cogeneration system with methanol steam reformer”, International Journal of Hydrogen Energy, Vol.39 (2014)14448-14459. (SCI)(IF:2.93)(通訊作者)

(35)Jenn-Kun Kuo, Pei-Hsing Huang*, Wei-Te Wu, Chi-Ming Lu,”Mechanical and fracture behaviors of defective silicon nanowires: combined effects of vacancy clusters, temperature, wire size, and shape”, Applied Physics A, Vol.114 (2014)1247-1256.(SCI)(IF:1.694) (第一作者)

(35)Pei-Hsing Huang, Jenn-Kun Kuo*, Chun-Yen Huang, “A new application of the UltraBattery to hybrid fuel cell vehicles”, International Journal of Energy Research, Vol.40 (2016) 146-159. (SCI)(IF:2.4)(通訊作者)

(36) Jenn-Kun Kuo*, Chung-Neng Huang, Tsung-Hung Lu, “Experimental investigation on heat transfer and pressure drop of ZnO/ethylene glycol-water nanofluids in transition”, Applied Thermal Engineering, Vol. 93 (2016) 425-432. (SCI)(IF: 2.739)(第一作者)（通訊作者）

(37) Pei-Hsing Huang , Jenn-Kun Kuo*, Zong-Dain Wu, “Applying small wind turbines and a photovoltaic system to facilitate electrolysis hydrogen production”,International Journal of Hydrogen Energy, Vol. 41, 2016, 8514-8524. (IF: 3.205) (通訊作者)

(38) Jenn-Kun Kuo, Pei-Hsing Huang*, Tzu-Hsiu Huang and Jheng-Yu Luo, “Adsorption behaviors of hydrogen sulphide on Au(110) nanoslit array surfaces using molecular dynamics simulations”, Molecular Simulation, Vol.42 (2016) 1429-1436. (IF:1.678) (第一作者)

(39) Jenn-Kun Kuo, Pei-Hsing Huang*, Meng-Jun Guo, “Removal of CrMo alloy steel components from investment casting gating system using vibration-excited fatigue failure”, The International Journal of Advanced Manufacturing Technology, Vol. 89, 2017, 101-111. (SCI)(IF:2.209) (第一作者))

(40) Pei-Hsing Huang, Jenn-Kun Kuo*, Cheng-Yun Han, “Numerical investigation into slope-climbing capability of fuel cell hybrid scooter”, Applied Thermal Engineering, Vol.110, 2017, 921-920. (SCI)(IF: 3.356) (通訊作者)

(41) Jenn-Kun Kuo, Pei-Hsing Huang*, Hsin-Yi Lai, Jian-Rong Chen, ” Optimal gating system design for investment casting of 17-4PH stainless steel enclosed impeller by numerical simulation and experimental verification”The International Journal of Advanced Manufacturing Technology, Vol.92 (2017) 1093-1103. (SCI) (IF:2.209 ) ( 第一作者)

(42). Pei-Hsing Huang, Jenn-Kun Kuo*, Sie-Jhih Tsai , Yu-Chou, Tsai, “Evaporation analysis of different fuels in evaporator coil of steam reformer for stationary PEM fuel cell systems”, Applied Thermal Energy, Accepted on 2017.9.10. (SCI)(IF:3.356) (通訊作者)